ZEOLITE PROCESSING AS HEAVY MATERIAL
DOI:
https://doi.org/10.30829/zero.v1i1.1457Abstract
Research on zeolite processing as a reinforcement material is done to utilize natural resources in North Sumatera Province. Zeolite processing is so nanometer-sized by using a ballmill. Activation of zeolite is done by heating 1050 C for 10 minutes. The resulting zeolite particle size is 290 nanometers. It is obtained from 80 grams of zeolite measuring 1700 nanometers to 15 grams measuring 290 nanometers for 34 hours of grinding process in the ballmill.References
Adriana, Zaimahwati, Ramzi, Supardin, (2008), "Pembuatan Kayu Plastik dari Limbah Kayu Kelapa Sawit dan Polistirena Menggunakan Teknik Impregnasi Reaktif ", Prosiding Seminar nasional Sain dan Teknologi BRR NAD-Nias, Banda Aceh.
Aini, M.N., dan Indriati, L., (2007), "Proses Pemutihan Zeolit sebagai Bahan Pengisi Kertas", Buletin, Balai Besar Pulp dan Kertas, Bandung.
Bukit, N, (2011), "Pengolahan Zeolit Alam sebagai Bahan Pengisi Nano Komposit Polipropilena dan Karet alam SIR-20 dengan Kompatibelizer Anhidrida Maleat-Grafted Polipropilena", Disertasi, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Sumatera Utara, Medan.
Callister, Jr. and William, D. (2007), "Material Science and Engineering and Introduction" United State of America.
Hanafi, I., Halimatuddahliana, dan Hazizan, (2005), "Properties of Polypropylene/Ethylene-Propylene Diene Terpolymer/Natural Rubber (Pp/Epdm/Nr) Ternary Blend: The Effect of Dynamic Vulcanization", Solid State Science and Technology, Vol.13, No.1 & 2.
Harahap, S, (2006), "Kajian Bahan Laporan Akhir, Badan Penelitian dan Pengembangan Propinsi Sumatera Utara, Medan.
Hull, D, (1992), "An Introduction to Composite Material", Cambridge University Press, London.
Ismail, H, Salmah, Nasir, M, (2000), "Dynamic Vulcanization of Rubber
Wood-Filled Polypropylene/Natural Rubber Blends", Polymer Testing, 819-823.
Ketan, K.M., (2002), "A Literature Survey On Nanocomposites", University of of Massachussetts Lowell: Master of Science Thesis.
Kohls, J. J., and Beaucage, (2002), "Rational Desing of Reinforced Rubber", Cur OP. Solid St Mat Sci., 6:183-194.
zeolite processing as heavy material
Sajaratud Dur 45
Leblanc, J. R, (2002), "Rubber-Filler Interaction and Rheology Properties in Filled Compound, Prog.Polym.Sci 27: 627-687.
Makadia, C.M., (2000), "Nanocomposites of Polypropylene by polimer Melt Compounding Approach", University of Massachussetts Lowell: Master of Science Thesis.
Mc.Bain, J.W, (1932), "The Sorption of Gases and Vapors by Solids", Chapter 5, Rutledge and Sons, London.
Micheler, G. H., (2008), "Electron Microscopy of Polymers", Germany: Springer Laboratory
Mozgawa, W, Krol, M, and Barczyk, K, (2011), " FT-IR Studies of Zeolites from Different Structural Groups, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Please cite as: CHEMIK, 65, 7, 667-674
Pandey, J.K, Chu, W.S, Kim, C.S, and Ahn, S.H, (2009), "Bio-nano Reinforcement of Environmentally Degradable Polimer Matrix by CelluloseWhisker Form Grass", Composite: Part B 40, 676-680.
Pandey, C.S, and Ahn, S.H, (2010), "Preparation and Properties of Bionanoreinforced Composites from Biodegradable Polymer Matrix andCellulose Whiskers", Journal of Applied Polymer Science. 115 (4): 2493-2501.
Sembiring, R.S., (2014), "Penyediaan Nanokomposit Karet Alam-g-Glysidil Metacrilate/Bentonit", Tesis Magister. Program Pascasarjana USU. Medan
Stevens, M. P., (2001), "Kimia Polimer", Cetakan Pertama, Pradnya Paramita Jakarta.
Subiyanto, B, Suryanegara, L, Yano, H, (2006), "Perana Bio-nano Komposit dalam Industri di masa Depan", UPT BPP Biomaterial-LIPI, Laporan Teknik.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
