UJI FISIS BRIKET BIOARANG BERBAHAN BATANG TEH (CAMELLIA SINENSIS)

Authors

  • Abdul Halim Daulay Universitas Islam Negeri Sumatera Utara
  • Masthura Masthura Universitas Islam Negeri Sumatera Utara
  • Heni Puspita Sari Universitas Islam Negeri Sumatera Utara

DOI:

https://doi.org/10.30829/jistech.v7i1.12084

Abstract

Research has been done on the physicl test of charcoal briquettes made from tea stems (Camellia sinensis). This study aims to determine the physical characteristics of the charcoaI briquettes produced. This research is motivated by the increasing demand for human fuel, thus utilizing tea stems as the main ingredient in making briquettes. The sample variations used were tea tree trunk charcoaI and tapioca adhesive as an adhesive with a ratio of 90%:I0%, 80%:20%, 70%:30%, 60%:40%, and 50%:50%. The physical test carried out included water content, density, and calorific value. The results obtained from the physical test of biochar briquettes with the best quality approaching the quality standards of Indonesian briquettes were obtained on sample with a composition (70%:30%) with the value of water content, density, and calorific value, each of which was 5 .70%, 0.55 g/cm3, and (-) 7.62 cal/g.

References

A. Nugraha, A. Widodo, and S. Wahyudi, "Terhadap Karakteristik Pembakaran Briket," J. Rekayasa Proses, vol. 8, no. 1, pp. 29-36, 2017.

M. Masthura, "Analisis Fisis dan Laju Pembakaran Briket Bioarang Dari Bahan Pelepah Pisang," Elkawnie, vol. 5, no. 1, p. 58, 2019.

S. Suganal and G. K. Hudaya, "Bahan bakar co-firing dari batubara dan biomassa tertorefaksi dalam bentuk briket (Skala laboratorium)," J. Teknol. Miner. dan Batubara, vol. 15, no. 1, pp. 31-48, 2019.

A. Zaenul amin, J. T. Mesin, F. Teknik, and U. N. Semarang, "Pengaruh Variasi Jumlah Perekat Tepung Tapioka Terhadap Karakteristik Briket Arang Tempurung Kelapa," Sainteknol J. Sains dan Teknol., vol. 15, no. 2, pp. 111-118, 2017.

L. Sulistyaningkarti and B. Utami, "Making Charcoal Briquettes from Corncobs Organic Waste Using Variation of Type and Percentage of Adhesives," JKPK (Jurnal Kim. dan Pendidik. Kim., vol. 2, no. 1, p. 43, 2017.

Downloads

Published

2022-06-30

Issue

Section

Articles